- Extra-large platform to provide secure and comfortable work area—cycle tested to over 50,000 cycles using 150kg
- Extended support rail for greater user comfort and utility
- Heavy-duty internal spreaders for ease of stowage
- Heavy gauge plastic edge caps for a smoother profile
- Slip-resistant treads for comfort and security
- Cross tube on rear frames to increase rigidity
- Slip-resistant feet for maximum stability
-
-
- Non-conductive fibreglass stiles, ideal for working around electricity
- High-performance HolsterTop™, with specially designed paint, tool and equipment holders
- Easy to use H-spreaders to enable single-handed operation and add to the strength and stability of the ladder
- Heavy duty slip-resistant tread profile for added strength and security
- EDGE® moulded brace and foot pad combination provides enhanced bracings strength and protects the base tread from damage
-
- Great Trade quality British Made combination ladder
- Comfortable, slip-resistant D Shaped rungs and Box section stiles
- Solid aluminium locking bracing bar for added safety in freestanding mode.
- Combines an extension ladder. large stepladder and freestanding extension ladder
- Latest design can be configured for use on stairs
- Base stabiliser with large slip-resistant feet.
- Certified to BS EN131 for Trade & Industrial use
- Maximum Load 150kg (23.5st)
-
- Lightweight trade step with high safety handrail
- Tool tray for tools & materials
- Extra long twin safety handrails to aid with climbing
- Strong, deep anti-slip treads for comfort and security
- High support rail and handy work tray
- 12 month warranty
- 150kg work load capacity
- European EN131 Safety Standard
-
- BSI tested & Kitemarked to BS 8620
- Platform heights : 1.25m & 1.5m
- Width when fully assembled 650mm without stabilisers
- Overall length (Front to Back) 1370mm
- Overall height of unit 2.51m
- Working heights in excess of 3.5m
- Assembled weight 40kg
- Fully guarded platform with sprung locking access gates
-
A great quality multi-purpose combination ladder and work platform in one unit...Built and designed for trade use... this unit carries the European EN131 standard with a load rating of 150kg (23.5st) The picture shows the ladder in work platform mode ... but this versatile unit does so much more...two small ladders, double extension ladder, 'A-frame' step ladder, scaffold platform and a really useful stairway scaffold...
-
- Fully certified to the very latest BSI (British Standards Institute) Kitemark (KM617169) in respect to BSEN1004-1:2020
- INSTRUCTION MANUAL TO BSEN: 1298
- Conforms to the requirements of the 3T erection and dismantling method as set out by the HSE (Health & Safety Executive) and PASMA
- Available in 23 working heights for each of the 4 different Widths and Lengths, from 1.2m to 12.2m (platform height) in 0.5m increments
-
- Conforms to BS EN 1004 2020
- Manufactured under ISO 9001:2008
- Made from 2″ 16 gauge aluminium tube
- Folds away flat for ease of storage & transport
- Fits through standard doorways & corridors at 775mm wide
- Folding base unit suitable for single person assembly
- 250mm rung spacing
- Maximum platform safe working load of 275kg, the same as our industrial towers
-
- Fully certified to the very latest BSI (British Standards Institute) Kitemark (KM617169) in respect to BSEN1004-1:2020
- INSTRUCTION MANUAL TO BSEN: 1298
- Conforms to the requirements of the 3T erection and dismantling method as set out by the HSE (Health & Safety Executive) and PASMA
- Available in 23 working heights for each of the 4 different Widths and Lengths, from 1.2m to 12.2m (platform height) in 0.5m increments
-
- Manufactured under ISO 9001:2015
- Fully conforms to the European Standard
- Made from the highest grade aluminium 6062 T6
- Ideal for tight spaces and landing areas on stairwells
- Removable Ladder for ease of access
- 250mm Rung pitching
- Single Piece folding toeboard
- 600mm x 1.5m Trapdoor platform with a slip-resistant deck, self-closing trapdoor and windlock
-
A set of 4 threaded aluminium Legs for the Minimax tower system. By detaching the locking castors from the base of the tower and re-attaching them to these legs, individual height adjustment is then available at each corner of the tower. The thread allows for up to 250mm (10ins) of vertical adjustment to each leg of the tower ... indispensible when levelling the tower on an uneven surface.
-
- Enclosed Safety Cage® eliminates tie-off requirement.
- Compliant with industry rules for three points of contact.
- Ground Cue® bottom rung alert lets you know when you’ve reached the bottom rung.
- Tip & Glide™ wheels increase portability during transportation.
- Wheel lift castors allow you to roll the ladder while fully deployed, and lock in place for secure climbing.
-500x500.jpg)
-500x500.jpg)
