Podium steps have revolutionized safe working in the workplace over recent years… offering all-round 360-degree protection for the user. Our range features models from all the major manufacturers including Zarges Sherpascopic, Sherpamatic and ZAP models, Youngman Teleguard, Little Giant and Lyte SitePod ranges. Podium steps will ensure your workforce are using the ultimate HSE-approved low-level access equipment and remain productive and safe at the same time. Most of our steps are usually available for immediate free delivery to your site.
If you require further information or advice on which Steps would best suit you, please call us: 0300 303 22 99
Basket:
-
×
-500x500.jpg)
4 Tread Little Giant Safety Step
2 × £220.83 -
×
Zarges 3.0m Industrial Skymaster Plus X Combination Ladder
1 × £603.75 -
×
Little Giant 10 Tread Safety Cage Podium Step series 2
1 × £992.50 -
×
4 rung 'Loadstep' Lorry Bed Access Ladder
1 × £237.50 -
×
ZARGES 8 Tread Fibreglass Platform Step
1 × £196.88 -
×
Lyte Triple 3.0m Professional EN131 Ladder
1 × £245.83
Subtotal: £2,718.12
- Non-conductive fibreglass construction for hazardous electrical environments
- Certified to BS EN131 the standard for professional ladders
- Extra wide working platform – 400mm wide x 550mm deep
- High handrails to both sides and back
- Optional yellow plastic coated handrails (shown)
- Optional webbing strap to close off entry/exit (shown)
- Optional 2 rear wheels for effortless manoeuvrability
- BSI tested & Kitemarked to BS 8620
- Platform heights : 1.5m & 1.75m
- Width when fully assembled 650mm without stabilisers
- Overall length (Front to Back) 1370mm
- Overall height of unit 2.76m
- Working heights in excess of 3.7m
- Assembled weight 45kg
- Fully guarded platform with sprung locking access gates
- Lightweight and compact for easy transportation and fits easily into small commercial vehicles
- Double-braked wheels for manoeuvrability and addditional safety
- Guardrail and safety gate to ensure 360 degree protection to allow you to work facing any direction
- Auto-close mechanism on gate to enable hands-free access
- Pivoting stabilisers to enable the user to work in the right position whatever the job
- Product Code: LYTEPOD15X
- Platform heights: 1125mm and 1475mm
- Width when fully assembled 670mm (stabilizers not deployed)
- Overall height of unit 2510mm
- Working heights in excess of 3.5m
- Assembled weight 43kg
- Large fully guarded platform with sprung access gate
- 2 foot-braked locking swivel wheels
- BSI tested & Kitemarked to BS 8620
- Platform heights : 1.75m & 2.0m
- Width when fully assembled 650mm without stabilisers
- Overall length (Front to Back) 1370mm
- Overall height of unit 3.01m
- Working heights in excess of 3.9m
- Assembled weight 48kg
- Fully guarded platform with sprung locking access gates
- Enclosed Safety Cage® eliminates tie-off requirement.
- Compliant with industry rules for three points of contact.
- Ground Cue® bottom rung alert lets you know when you’ve reached the bottom rung.
- Tip & Glide™ wheels increase portability during transportation.
- Wheel lift castors allow you to roll the ladder while fully deployed, and lock in place for secure climbing.
- Non-conductive fibreglass construction for hazardous electrical environments
- Certified to BS EN131 the standard for professional ladders
- Extra wide working platform – 400mm wide x 550mm deep
- High handrails to both sides and back
- Optional yellow plastic coated handrails (shown)
- Optional webbing strap to close off entry/exit (shown)
- Optional 2 rear wheels for effortless manoeuvrability
- Non-conductive fibreglass construction for hazardous electrical environments
- Certified to BS EN131 the standard for professional ladders
- Extra wide working platform – 400mm wide x 550mm deep
- High handrails to both sides and back
- Optional yellow plastic coated handrails (shown)
- Optional webbing strap to close off entry/exit (shown)
- Optional 2 rear wheels for effortless manoeuvrability
- Extra-large standing platform with robust aluminium toe board for maximum protection
- Easy rung by rung adjustment system to change to different heights
- Double guard rails with safety chain to provide 360° protection during use
- Integrated tool tray to keep tools and materials easily accessible during use
- Automatic locking deck lock clip for added security
- Non-conductive fibreglass construction for hazardous electrical environments
- Certified to BS EN131 the standard for professional ladders
- Extra wide working platform – 400mm wide x 550mm deep
- High handrails to both sides and back
- Optional yellow plastic coated handrails (shown)
- Optional webbing strap to close off entry/exit (shown)
- Optional 2 rear wheels for effortless manoeuvrability
- Enclosed Safety Cage® eliminates tie-off requirement.
- Compliant with industry rules for three points of contact.
- Ground Cue® bottom rung alert lets you know when you’ve reached the bottom rung.
- Tip & Glide™ wheels increase portability during transportation.
- Wheel lift castors allow you to roll the ladder while fully deployed, and lock in place for secure climbing.
- Safe hands-free working due to handrails and kneebar on all sides.
- Easy access due to self-closing safety door.
- Highly stable due to variably adjustable stabilizers.
- Includes spacious, practical tool tray, for fitting at 2 heights.
- Spacious platform 600×425 mm.
- Comfortable ascent thanks to wide rungs 45 mm deep
- Enclosed Safety Cage® eliminates tie-off requirement.
- Compliant with industry rules for three points of contact.
- Ground Cue® bottom rung alert lets you know when you’ve reached the bottom rung.
- Tip & Glide™ wheels increase portability during transportation.
- Wheel lift castors allow you to roll the ladder while fully deployed, and lock in place for secure climbing.
- This is the Mini-ZAP 3 – 5 rung model
- Large standing platform 665 mm × 440 mm, with guard rail and knee bar.
- Easy to operate: rung by rung height adjustment based on push-up ladder principle.
- Already complies with EN 131 without stabilisers thanks to crosspieces on both sides.
- Stable according to the requirements of BGI 637 with swung-out stabilisers.
- Extra-large standing platform with robust aluminium toe board for maximum protection
- Easy rung by rung adjustment system to change to different heights
- Double guard rails with safety chain to provide 360° protection during use
- Integrated tool tray to keep tools and materials easily accessible during use
- Automatic locking deck lock clip for added security
- Safe hands-free working due to handrails and kneebar on all sides.
- Easy access due to self-closing safety door.
- Highly stable due to variably adjustable stabilizers.
- Includes spacious, practical tool tray, for fitting at 2 heights.
- Spacious platform 600×425 mm.
- Comfortable ascent thanks to wide rungs 45 mm deep
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Safe hands-free working due to handrails and kneebar on all sides.
- Easy access due to self-closing safety door.
- Highly stable due to variably adjustable stabilizers.
- Includes spacious, practical tool tray, for fitting at 2 heights.
- Spacious platform 600×425 mm.
- Comfortable ascent thanks to wide rungs 45 mm deep
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Enclosed Safety Cage® eliminates tie-off requirement.
- Compliant with industry rules for three points of contact.
- Ground Cue® bottom rung alert lets you know when you’ve reached the bottom rung.
- Tip & Glide™ wheels increase portability during transportation.
- Wheel lift castors allow you to roll the ladder while fully deployed, and lock in place for secure climbing.
- This is the Mini-ZAP 4 – 7 rung model
- Large standing platform 665 mm × 440 mm, with guard rail and knee bar.
- Easy to operate: rung by rung height adjustment based on push-up ladder principle.
- Already complies with EN 131 without stabilisers thanks to crosspieces on both sides.
- Stable according to the requirements of BGI 637 with swung-out stabilisers.
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- This is the Mini-ZAP 3 – 5 rung model
- Large standing platform 665 mm × 440 mm, with guard rail and knee bar.
- Easy to operate: rung by rung height adjustment based on push-up ladder principle.
- Already complies with EN 131 without stabilisers thanks to crosspieces on both sides.
- Stable according to the requirements of BGI 637 with swung-out stabilisers.
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Extra-large standing platform with robust aluminium toe board for maximum protection
- Easy rung by rung adjustment system to change to different heights
- Double guard rails with safety chain to provide 360° protection during use
- Integrated tool tray to keep tools and materials easily accessible during use
- Automatic locking deck lock clip for added security
- Zarges single sided work platforms comply with the new European standard EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- This is the Mini-ZAP 3 – 5 rung model
- Large standing platform 665 mm × 440 mm, with guard rail and knee bar.
- Easy to operate: rung by rung height adjustment based on push-up ladder principle.
- Already complies with EN 131 without stabilisers thanks to crosspieces on both sides.
- Stable according to the requirements of BGI 637 with swung-out stabilisers.
Out of stock 
- EN 131-7
- Supplied flat-packed for easy on site assembly
- Comfortable ascent on 200mm wide treads
- Spacious 600mm x 800mm platform
- Mobile and ready for use in seconds utilizing four sprung castors (two with brakes)
- Maximum safety through 1.0m high guardrails on three sides
- Swing-up steps with treads 200 mm deep for comfortable and safe ascent.
- Can be moved very quickly and easily, as it has four swivel castors on the access section and two fixed castors on the support section.
- Ready-for-use in no time through a central foot-operated brake on the access steps.
- Will pass through doorways – even when erected.
- Flexible applications due to three different platform heights with just one work platform.
- Double-sided handrail on the access steps and platform railing for maximum work safety.
SUBSCRIBE TO OUR NEWSLETTER
Sign up to our newsletter to receive news on product releases, updates and specials!
Podium steps have revolutionized safe working in the workplace over recent years… offering all-round 360-degree protection for the user. Our range features models from all the major manufacturers including Zarges Sherpascopic, Sherpamatic and ZAP models, Youngman Teleguard, Little Giant and Lyte SitePod ranges. Podium steps will ensure your workforce are using the ultimate HSE-approved low-level access equipment and remain productive and safe at the same time. Most of our steps are usually available for immediate free delivery to your site.
If you require further information or advice on which Steps would best suit you, please call us: 0300 303 22 99
Price range: £724.86 through £804.06 ( Price range: £724.86 through £804.06 excl. VAT)
Price range: £732.24 through £774.24 ( Price range: £732.24 through £774.24 excl. VAT)
Price range: £796.02 through £875.22 ( Price range: £796.02 through £875.22 excl. VAT)
Price range: £865.20 through £944.40 ( Price range: £865.20 through £944.40 excl. VAT)
Price range: £932.40 through £1,011.60 ( Price range: £932.40 through £1,011.60 excl. VAT)
Price range: £1,216.97 through £1,384.97 ( Price range: £1,216.97 through £1,384.97 excl. VAT)
Price range: £1,232.87 through £1,523.51 ( Price range: £1,232.87 through £1,523.51 excl. VAT)
Price range: £1,285.25 through £1,453.25 ( Price range: £1,285.25 through £1,453.25 excl. VAT)
Price range: £1,322.53 through £1,613.17 ( Price range: £1,322.53 through £1,613.17 excl. VAT)
Price range: £1,335.56 through £1,503.56 ( Price range: £1,335.56 through £1,503.56 excl. VAT)
Price range: £1,407.48 through £1,698.12 ( Price range: £1,407.48 through £1,698.12 excl. VAT)
Price range: £1,423.26 through £1,611.26 ( Price range: £1,423.26 through £1,611.26 excl. VAT)
Price range: £1,493.64 through £1,681.64 ( Price range: £1,493.64 through £1,681.64 excl. VAT)
Price range: £1,553.77 through £1,881.65 ( Price range: £1,553.77 through £1,881.65 excl. VAT)
Price range: £1,782.72 through £2,110.60 ( Price range: £1,782.72 through £2,110.60 excl. VAT)
