The simplest ideas are always the best! Trim 2 Fit replacement ladder feet are made of solid rubber and are pre-marked with cutting guides, allowing you to trim the feet to exactly fit your box section ladder whatever the make or size. No longer do you have to waste time trying to track down the manufacturer to obtain the correct feet for your ladder.

A pair of thick, soft urethane sleeves for the top of your ladder offering protection to surfaces like upvc window sills where leaning ladders would normally mark or damage the surface. Ladder Pads  will stretch to fit most sections of ladder, wood, fibreglass or aluminium. they also provide extra traction between ladder and wall reducing the possibility of side slip. Can be used on internal and external walls.

Werner disposable paint cup liners (79002) to minimise mess and clean-up time.

The 79002 Lock-In Paint Cup Liner is a disposable liner for use with the Paint Cup (79001). Each unit includes 4 liners.

Four heavy duty dimpled rubber mats linked by a strong metal loop which can be stacked in different combinations to suit varying slopes and ground conditions. Stack all four mats under one one leg, two under each leg or one under one leg and three under the other to level your ladder perfectly. As if that wasn’t enough, these mats are also a great antislip and load spreading aid….. preventing your ladder slipping, sliding and sinking into soft ground.

The 79001 Lock-In Paint Cup is great for trim painting and cut-in applications. With a built-in magnet to secure a paint brush, the paint cup holds 1 litre of paint. For use on Werner ladders that include Lock-In System sockets. The paint cup can also be used with Werner disposable paint cup liners (79002) to minimise mess and clean-up time.

The indispensable accessory for securing ladders quickly and safely to a vehicle roof rack. Simple to use, these clamps are supplied in pairs and with a flick of the wrist, up to three ladders can be securely clamped to any roof rack and padlocked (2 padlocks included) for the ultimate in security…. the best selling ladder accessory ever……. these great clamps secure your ladder in seconds …. no van is complete without a set.

The Ladder Association is ‘The recognised authority in the UK’  when it comes to anything to do with Ladders and Ladder safety. This self-adhesive Inspection record system is specifically designed by the Ladder association for Ladders and Stepladders. The use of this record allows users to see at a glance if the ladder/stepladder is ready for use and when the last inspection was carried out.

When it comes to storing your ladders safely, you need a pair of really heavy duty wall brackets that will lock your ladder to the wall securely. An alarmingly high percentage of our business comes from people replacing stolen ladders! Don’t let anyone steal yours!. Ideal for use inside or out…. Two extra heavy-duty steel brackets, one with a locking bar, our brackets are epoxy powder coated…

Work in comfort and safety with this ingenious sturdy work platform. Simply hook it onto the rungs of your ladder to instantly transform a narrow uncomfortable rung into a large, safe work platform allowing you to spend longer periods on your ladder without wearing painful grooves in your feet! Manufactured in aluminium for super strength and lightweight, the platform is produced from aluminium chequer plate for ultimate non-slip properties.

These tough, clear moulded plastic holders can be permanently riveted to your ladder or step ladder and include a double sided printed plastic insert which allows a unique item ID number, the date of the last inspection and the date of the next, to be recorded… ensuring compliance with the latest work at height regulations.

The 79005 Lock-In Job Caddy expands your work surface and customises your ladder top. Holds large or odd shaped items like fluorescent bulbs or hammers. There are 4 storage compartments to keep small parts separated. Holders for screwdrivers, pliers, putty knives and cloths. End hook is built in for increased convenience.

The 79004 Lock-In Utility Bucket expands your work surface and customises your ladder top. Great for on the job site or household use. The utility bucket locks securely into the ladder top and is ideal for wet or dry applications. Holds up to 4.5 litres of liquid and has an 11kg capacity. Integrated Lock-In System socket on the bucket allows for an additional Paint Cup (79001), ToolLasso (79007) or Utility Hook (79006).

Our all new “V” notched all aluminium stand off (or ladder stay as they are sometimes called), is a lightweight attachment suitable for all ladders. It simply clips on to the top of any ladder and the thick rubber wall pads rest against the wall, helping to reduce the chance of your ladder slipping. The bracket supports the ladder 300mm (12in) away from the wall for easy and comfortable painting or general maintenance work.

Ladders can easily become a tip or trip hazard when they are not stored incorrectly. They often cause damage to cars or other property if they are bumped or tipped over. They may even cause a serious injury if they fall over or are pulled over by a young child.

• Simply clamps onto a single ladder (not supplied) without any drilling
• complete with sturdy shatterproof wheels
• lightweight, all alloy construction.
• Great if you only need a roof ladder occasionally
• Flat-Packed in 2 sections for easy on-site assembly
• Roll it up the roof then flip it over the ridge for safe roof access

The all new “MEGASTOPPA” is the Daddy of them all when it comes to simple, effective anti-slip devices for your ladder. Manufactured from an incredibly hard wearing granular rubber compound usually used for outdoor flooring panels in children’s playgrounds, the Megastoppa is a revolutionary design …being extra-wide (95cm) it will suit all ladder widths including most wide stabiliser bars on combination ladders.

Now it’s easier than ever to keep your tools and supplies at arm’s reach when working atop your Little Giant Ladder. The Little Giant Cargo Hold attaches quickly and easily to any shape ladder rung and holds virtually anything you need for your next project.

The 79003 Lock-In Job Bucket clips right into Werner’s fiberglass step ladder tops… customising your workspace. Integrated tape measure and screwdriver holders are features of the job bucket along with top grooves to hold round pipes in place. Great for all trades electrical, maintenance, plumbing and construction.

Little Giant Fuel Tank™ vertical paint tray is specially designed to fit the Little Giant Select Step, and any Little Giant multi-use ladder. The Fuel Tank holds a full gallon (4.5 lt) of paint and sports a convenient carrying handle and a stand-alone base to prevent tipping if you decide to use it as a paint bucket.

The Wing Span boasts a fixed width of 50 inches and a stand-off of 12 inches for working around windows, rain gutters, bushes, overhangs and other obstacles. The Wing Span’s extra width adds even more versatility and stability to any Little Giant ladder in the extension position.

The versatile Work Platform fits on the rungs of all Little Giant multi-use ladders and is rated to hold up to 300 lbs (135kg). Use it as a tray for a paint bucket or tools, or use it as a sturdy, comfortable standing platform.

The all new “MAXISTOPPA” is an all rubber anti-slip device which we reckon is indestructable and will last a lifetime, being made totally from solid rubber (no other materials to deteriorate). Able to accomodate all known ladder widths… just simply drop it onto the ground and place your ladder onto Maxistoppa for unbeatable grip on most surfaces. No nuts, bolts or clamps… no assembly, maxistoppa is instantly ready for use.

A Sturdy pair of stabiliser legs which quickly attach to most ladders to give superb added lateral stability and anti back-slip properties and enable you to work safely at height. Manufactured here in the UK from strong electro-plated steel, these legs are adjustable to fit most extension ladders and clamp on quickly with the aid of large easy turn hand wheels.

Rhino SafeClamps are  revolutionary universal clamps designed for the safe transporting and securing of ladders on to vehicle roof bars and racks. Supplied as a pair, the Rhino safeclamp will fit most roof bar and rack profiles, and most types of 2 or 3 section ladders (max ladder weight 40kg).
Manufactured from tough composite plastic using a stainless steel hook and accredited by 20g crash & life cycle testing.